> For the complete documentation index, see [llms.txt](https://help.steeple.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.steeple.com/en/ecrans-tv/utiliser-un-appareil-comme-appareil-partage.md).

# Using a device as a shared device

Display Steeple on a computer, a tablet, or a connected TV, without a Steeple box, using a 6-digit code.

A computer, a tablet or a connected TV can display Steeple on-site, without a Steeple box. You just need to**pair it** with your organization: the device displays a code, an administrator enters it in Steeple.

{% hint style="info" %}
Pairing is done by an administrator of the organization or community of the device. Does your screen have a Steeple box? See instead [Troubleshooting and installation of Steeple TV screens](https://help.steeple.com/en/ecrans-tv/depannage-ecrans-tv.md).
{% endhint %}

## Pair the device

### 1. Prepare the device in Steeple (administrator)

In the app **Devices**, create the device with **New device** if it does not already exist. When it is created, the page **Pairing** opens directly.

Choose its session type:

* **Shared display** : the device directly displays the screen's content.
* **Shared session** : the device displays a login page, and each employee logs in there to see their own content.

### 2. Display the code on the device

1. On the device, open [app.steeple.com](https://app.steeple.com) in the browser.
2. On the login page, click **Use as a shared device**.
3. A 6-digit code is displayed. It changes every 5 minutes, automatically.

### 3. Enter the code in Steeple (administrator)

1. In **Devices**, open the **Settings** device settings, then **Pairing**.
2. In the section **With a code**, enter the code shown at that moment on the device.
3. Click **Pair**. The message **The device has been paired** confirms the pairing.

Steeple then appears on the device, or its login page for a shared session. Details in images: [Pairing a screen with a 6-digit code](https://help.steeple.com/en/ecrans-tv/depannage-ecrans-tv/depannage-ecrans-tv-1.md).

{% hint style="success" %}
**Without a code** : the section **With credentials** of the page **Pairing** gives an email address and password specific to the device. Enter them on the device's login page.
{% endhint %}

## If it doesn't work

### The code does not appear on the device

The message **Unable to generate a code** appears?

1. Check that the device is connected to the internet.
2. Wait a few minutes: beyond 10 codes requested in 5 minutes from the same network, you need to wait.
3. Click **Generate a new code**.

### Invalid or expired code

* Enter the code displayed at that moment: it changes every 5 minutes.
* Check that you are in the settings for the correct device.

### Too many attempts, try again in a few minutes

Beyond 10 incorrect codes in 5 minutes, you must wait up to 5 minutes before starting again.

### The device is already paired

In Steeple, the page **Pairing** no longer shows a code field, only the button **Unpair**. On the device, the message **A pairing already exists, please unpair to continue or log out** may appear.

1. In **Devices** > **Settings** > **Pairing**, click on **Unpair**.
2. On the device, click **Try again**.
3. Restart the pairing with the new code.

{% hint style="warning" %}
**Unpair** disconnects the currently linked device. A device is also disconnected when another device takes its place.
{% endhint %}

### This device is already configured via its box

You are in the settings of a screen equipped with a Steeple box: it does not need pairing. Choose the relevant device without a box, or create it with **New device**.

### You cannot enter the code

Only an administrator of your organization, or of the device community, can pair it. Stay in front of the device to read the code to it at the moment it enters it: it changes every 5 minutes.
